How to start a riding lawn mower with a screwdriver | Without a Key

Riding lawn mower most permanently comes to decorate with a starter key. This is for safety causes, but it also helps to forbear stealing.

Therefore important security might be to you. Unfortunately, your riding lawn mower’s key switch is broken or lost your key switch, so in this situation, you need to alternate techniques to run your riding lawnmower. The most significant thing to keep in mind when hot-wiring anything is secure. To start these techniques firstly, make sure you had all tools. Battery security is extremely significant.

Best Screwdriver on the budget

Starting a Riding Mower Using a Screwdriver:

Techniques 1 : Fixed of tools in a tools kit variously.

1. Use a flat-head screwdriver for these techniques.
2. Place screwdriver in the lawnmower keyhole.
3. Turn the screwdriver in the keyhole, same as you, as would rotate the mower key.

These techniques are straightforward and follow the full instruction; after the full techniques, you will practice starting your riding lawnmower.

Techniques 2 : Works very well on cub cadet and craftsman version 

Techniques 3 : Warm-wiring the lawn mower in command, to bypass the key switch.

Techniques 4: Setting a brand new ignition switch

All the techniques are mentioned above; follow all techniques to starting a mower on your own. We have one last option for you.

Awareness:

Every mechanism work has some particular awareness.

• Only skilled owners should try this task at home.
• If you, not a professional owner or you are not enough knowledge about lawnmowers, you must read this article 3-4 times, then try it yourself.
• Always wear safety gear like gloves and sunglasses before repairing anything on the mower.
• Before the repair lawnmower, you must disconnect the power connection.

Benefits of utilizing screwdrivers:

• Does not requires any keys.
• Simple to switch.
• No need for extra parts.
• It can be done in one hand.

Disadvantages of utilizing a screwdriver on a lawnmower:

• There is a possibility that the power switch can be damaged due to the screwdriver metal body.
• There is a risk of stealing; the thief can steal it with a screwdriver.

All the techniques are mentioned above; follow all techniques to starting a mower on your own. We have one last option for you.

How do you jump start a lawnmower with a screwdriver?

It’s an effortless task than any other repair. If you need to jump a solenoid on a lawnmower, you must follow these techniques to complete this work as well:

I complete this work in 5 techniques; stay with me:

Techniques #1: Switch On the LawnMower Ignition Switch

Switch on the ignition button, which will transmit the electric power to the coil of the lawnmower. Make sure your engine is on.

Techniques #2: Identify the Mower Solenoid

Identify the solenoid of the mower. There are two switches in the rear of the solenoid. If you got the two switches, just jump the switch of the solenoid.

Techniques #3: Examine The Connections

In the solenoid, there are two cables, red and black. The red cable is the negative terminal (-ve), and the Black cable is the Positive (+ve) terminal.

Connect the Positive terminal to the mower’s body any metal, and connect the red cable to the mower battery negative (-ve) terminal.

Techniques #4: Put on the choke

After connecting the two solenoid cable in the mower, switch on the choke. 

Techniques #5: Jump The Solenoid

Check the solenoid two cables that are connected to the mower; if all is good. So turn on the battery for a few seconds. It will try to start and makes the sound. Note the sound, If the sound is good. Then start again. Congratulations, you have successfully done the work.

Last Word

The jumping mechanism of the solenoid is quite an easy task. You don’t require to go to any repair shop to solve this small problem. You can solve this issue at home by yourself.

Remember one thing; an intelligent mower owner always try to fix problems by himself.